FUJITSU INTEGRATED REMOTE MANAGEMENT CONTROLLER IRMC S2/S3 - Manual (Page 231)

iRMC S2/S3 231
System Event Log and Internal Event Log
IPMI Event Log Configuration
Default LCD panel display filtering
I
If a ServerView Local Service Display module is fitted in the
managed PRIMERGY server, you can also select the error
severities for displaying the SEL on the ServerView Local Service
Display. (This selection is independent of the selection you have
made for the SEL entries displayed on the
System Event Log Content
page.)
Display Critical , Display Major , Display Minor , Display Info , CSS only
Here you select one or more severity levels for which event log
entries should be displayed by default on the on the ServerView
Local Service Display.
Default Web interface display filtering
Display Critical , Display Major , Display Minor , Display Info , CSS only
Here you select one or more severity levels for which event log
entries should be displayed by default on the on the
System Event Log Content page (see page 224 ).
Show Resolutions
If you choose this option, the cause of the entry and a proposal for
resolution will be displayed for each SEL entry of severity level
Critical , Major , or Minor .
Ring Buffer
The event log is organized as a ring buffer.
Linear Buffer
The event log is organized as a linear buffer.
I
When the linear event log has been completely filled, it is not
possible to add any further entries.
Ê Click Apply to activate your settings.