FUJITSU INTEGRATED REMOTE MANAGEMENT CONTROLLER IRMC S2/S3 - Manual (Page 57)

iRMC S2/S3 57
Configuring and using the serial interface of the iRMC S2/S3
3.3 Configuring and using the serial interface
of the iRMC S2/S3
The serial interface of the iRMC S2/S3 offers you the following possibilities:
– You can use the terminal application Remote Manager (Serial) over a null
modem cable (see
section "Using the Remote Manager (Serial) interface"
on page 62 ).
– In the case of an iRMC S2, you can forward alerts via modem. You can
configure alerting via modem using the web interface of the iRMC S2 (see
section "Serial / Modem Alerting - Configure alerting via modem" on
page 255
).