FUJITSU INTEGRATED REMOTE MANAGEMENT CONTROLLER IRMC S2/S3 - Manual (Page 156)

156 iRMC S2/S3
BIOS - Backing up/restore BIOS settings, flashing BIOS
7.5.1.1 Backing up single BIOS parameters in ServerView® WinSCU
XML format
The Backup BIOS Single Parameters in ServerView® WinSCU XML format group
allows you to back up single BIOS parameter settings in ServerView® WinSCU
XML format and to save the backup to a file.
Figure 75: Backup BIOS Single Parameters in ServerView® WinSCU XML format
Backup Status
Displays the status of the current backup process. Successful completion
is indicated by "Operation Successful". The
Backup Status is only
displayed if a backup is currently in process or has completed.
You can clear the status display by clicking the Clear Status button, which
is only available if a status is currently displayed.
Clear Status
Clears the status information indicated under Backup Status . This button
is only available if a status is currently displayed under Backup Status .
Backup Filename
This input field is disabled ("grayed out") by default. Initially, it displays the
file name that is dynamically generated by the iRMC S2/S3.
Edit Filename
Enables the Backup Filename field, thus allowing you to enter a file
name ( .pre ) of your choice.
Save Filename
Saves the edited file name, which, starting from now, will be the
name displayed by default in the
Backup Filename field.