Waves eMotion LV1 64-Channel Mixer with Axis One Custom Computer - Manual (Page 76)

71
Waves eMotion LV1 User Guide | Chapte r 3 : Channel Window
Window
Channels and Presets
The selected channel is focused in the Channel mixer. The selected channel name is always shown in the Name box
on the left side of the Top Bar. To name a channel, double-click on the box. The channel name can also be changed
in the Mixer and Patch windows.
A channel can be selected in two ways:
1. Mixer window : Touch a fader or channel strip. The channel strip becomes highlighted, indicating that
the channel is selected.
2. Any window: Use the Channel Name drop-down menu in the Top Bar to directly access a channel.
You can also use the right/left arrows to move the selection up and down one channel at a time.
This menu is always visible.
Channel Presets
Channel presets are powerful tools for setting up a channel.
They are managed with the Preset menu, which is accessed from the Top Bar. The menu
affects the selected channel only. Channel presets enable you to immediately load all of a
channel’s settings—audio routing, assignments, plugins and their parameters, aux sends, and
control groups—and then adjust its parameters, if needed. You can then save these settings as
a new preset.
Complete sessions can be created from channel presets, or you can copy/paste channels to use
as starting points for other channels. All, or part, of a channel’s parameters can be copied from
one channel to another. Many mixer setups have a lot in common, so using channel presets for
session building can save a lot of time.
Note : Applying a preset that uses a plugin rack sequence that is different than the current one propagates
the new preset to all scenes. Previously saved settings for this channel will be discarded.