Waves eMotion LV1 64-Channel Mixer with Axis One Custom Computer - Manual (Page 45)

40
Waves eMotion LV1 User Guide | Chapter 1: Setup Window
Using the System Inventory Page
This section demonstrates how to set up a basic mixer system and how to work offline without a server or I/Os.
Configuring a Basic Mixer Setup
Below is an example of an eMotion LV1 mixer setup. This configuration provides two I/Os for stage and one I/O for FOH and PA. There is
no real difference between configuring a small system or larger one. It’s just a matter of scale. Refer to the eMotion LV1 Quick Start Guide
for an overview of system setup.
1. Configure Hardware
Use Cat 5e, Cat 6, or Cat 7 cables to connect all devices to the network switch.
FOH Stage
Host computer + eMotion LV1 software
SoundGrid server
1 GB Ethernet switch
3 I/O devices
Confirm that all connectors are well seated and that cables are secured. A
damaged or poorly seated cable can be difficult to diagnose or repair during a live
event.