Waves eMotion LV1 64-Channel Mixer with Axis One Custom Computer - Manual (Page 207)

202 Waves eMotion LV1 User Guide | Appendix D: Mackie Control
π
Generate Program Change: Selecting this option for the MIDI output sends a Program Change command whenever a Scene is
recalled. The program change number follows the Scene index number.
Display MTC: When selected, the time window in the Top Bar displays MIDI timecode. When deselected, the window displays
time from the host computer.
Mirror Input (Thru): When Mirror Input is selected, the input stream is sent directly, unchanged, to the selected output port.
Mixer Remote
This section sets the port that the MIDI controller will use to map the mixer. The 16 faders in each layer are mapped to standard
MIDI mapping: volume, pan, and mute controls per fader.
Input Port/Output Port: Select MIDI Ports - selection can be set a specific port only.
Follow Mixer Window: When Follow Mixer Window is selected, the MIDI faders will map the faders of the selected Layer, as
displayed in the Mixer window. For example, when Mixer Layer 17–32 is selected, MIDI channel 1 will control mixer channel 17.
When AUX/EFX is selected, MIDI Channel 1 will control AUX/MON 1.
When Follow Mixer Window is off, the mixer and the controller work independent of each other.
Using a SoundGri d I/O device as a MIDI port: A SoundGrid I/O device that has a MIDI port can be assigned to the SoundGrid MIDI
driver. This device can then be used as a MIDI port for the mixer, as well as an I/O.