Waves eMotion LV1 64-Channel Mixer with Axis One Custom Computer - Manual (Page 41)

36
Waves eMotion LV1 User Guide | Chapte r 1: Setup Window
Servers
The Servers rack is used to assign, remove, and configure a SoundGrid server.
The server’s CPU temperature is shown on the icon.
`
Me nu Item/Indicator Possibilities Function
Devices Drop-down menu Choose among the servers on the SoundGrid network. A server that is
assigned to another host is unavailable and grayed out.
Server Network
Buffer
Range @ 44.1–48 kHz:
40-96 samples
Default: 40 samples (0.8 ms)
Range @ 88.2–96 kHz:
80-192 samples.
Default: 80 samples (0.8 ms)
This sets the amount of time it takes for audio to stream from the I/O to the
server and back, determining the speed of real-time processing. Lower settings
result in lower system latency and greater responsiveness. Higher settings yield
more stability but greater latency. If you encounter pops or similar
errors, increase the buffer setting. The buffer size is set in samples but is also
displayed in milliseconds.
Information (N/A) Displays technical details about the server.
Remove Releases the server from the local host. It will then be available to other hosts.
Server Status
Indicator
On
(N/A) Indicates that the server is present and operational. The server’s rack slot will
remain red until the firmware is compatible with current SoundGrid software.
Launch the updater manually by clicking the FW (firmware) button.
Using a Seco nd Server
Assign a second server to provide redundancy in the event that the primary server fails. Switchover to the second server is
automatic. It takes a few seconds. During this period sound is muted.