Waves eMotion LV1 64-Channel Mixer with Axis One Custom Computer - Manual (Page 113)

108
Waves eMotion LV1 User Guide | Chapte r 3 : Channel Window
Window
14. Cue/Solo button
Activates Cue or Solo. When in the Cue mode, the Cue button sends selected channels and busses to the cue buss. In Solo mode, the
Solo button activates Solo-in-Place mode for the channel, muting all other channels. Cue assignment stays active when the channel
is muted.
Cue/solo behavior is set in the Cue control page of the Channel window, which is easily accessed by pressing the gear icon under
the “Clear Solo” button in the Top Bar. Cue configuration is discussed later in this chapter ( Channel >Cue Section ).
E
XTERNAL
R
OUTING
S
ECTION
15. Direct output panel: a dd and delete I/Os
This panel is used to assign I/Os to the channel’s direct outputs. Hide/unhide the panel view by toggling the Direct button.
• A dd opens a drop-down menu of available hardware I/Os and drivers that can be assigned
to the channel. All I/Os that are assigned to the mixer inventory appear in the list. Click on
an I/O to add it to the list of assignments. I/Os that are already assigned are grayed out.
• Delete un-assigns the selected I/O and removes it from the I/Os list. Once released, the I/O is
available for other mixer outputs or other systems, if I/O sharing is active.