Waves eMotion LV1 64-Channel Mixer with Axis One Custom Computer - Manual (Page 206)

Waves eMotion LV1 User Guide | Appendix C: Incorporating MIDI
Show Contro l Section
This section sets the MIDI port and channel used for triggering Scenes using MIDI program change messages.
Select a MIDI Device: Select an Input and Output port from the drop-down menu. All available MIDI ports are listed. The selected
device appears in the Port Name box.
Choose a MIDI Channel: Select a MIDI channel for Input and Output.
Assigning a Specific (single) channel (when applicable) means that all data from other channels data are filtered out from the incoming
stream. Messages that are part of the stream and are common to all channels will remain in the stream.
Select the All channels option and all the channels will remain in the stream; none will be filtered. The incoming stream is unchanged.
Follow Program Change: When selected, scene changes can be controlled by MIDI program change commands from the device on the
selected input port and channel. Scenes changes are based on the Scene index numbers. The scene index number reflects its position
in the Scenes List in the Show window.
For example:
Program A, MIDI control change messages 0–127 > Scenes 1–128
Program B, MIDI control change messages 0–127 > Scenes 129–256
Program C, MIDI control change messages 0–127 > Scenes 257–384
Program D, MIDI control change messages 0–127 > Scenes 385–512
The mixer supports up to 1000 scenes.
When Follow Program Change is selected, the MIDI indicator in the Scenes window is illuminated. Follow
Program Change can be activated from either window.