Waves eMotion LV1 64-Channel Mixer with Axis One Custom Computer - Manual (Page 114)

109
Waves eMotion LV1 User Guide | Chapte r 3 : Channel Window
Window
16. Assigne d I/O List
I/Os patched to the channel output are shown here. Click on an I/O to select it for delay group assignment or
trim adjustment This list is identical to the buss Direct Out drop-down menus on mixer channel strips.
17. I/O delay
Displays the user-defined delay of the selected I/O. Also used to set the delay of an I/O or a delay group. Delay
value is displayed in samples. Refer to Appendix E for a detailed description of eMotion LV1 delay
management.
18. Delay gro up on/off
Enables/disables user-defined delay, whether a delay group or a single selected I/O.
19. Select delay group
Assigns a selected I/O to one of 16 delay groups. An I/O can be assigned to more than one delay group. To
enable delay groups, the mixer must be set to Multiple Delay Groups in the Mixer Settings page (Settings >
Mixer Settings).
20. I/O trim
Adjusts the signal sent to the I/O device. Trim level is displayed in the value box. When no I/Os are selected,
the knob is grayed out.
Range: -144 dB to +10 dB
21. I/O source
Sets source send points for all I/Os assigned to this channel.
• INP after input gain, before processing
• PRE pre-fader, after processing
• PST post-fader, after processing
• PSP post-fader, after processing, after panning