Waves eMotion LV1 64-Channel Mixer with Axis One Custom Computer - Manual (Page 136)

131
Waves eMotion LV1 User Guide | Chapte r 4: Mixer Window
Window
Effects 1–8 and Monitor 1–8 are aux busses, and they are identical in most Layer Modes. However, their signal flows differ slightly.
AUX/MON busses are typically used for monitor feeds. Signals are sent to auxes from channels and busses. These aux busses will be
mixed and then assigned directly to outputs. Each monitor aux can have up to eight plugins, so effects such as reverb, delay, or other
processes can be added to an aux buss before they are routed to I/Os.
AUX/EFX busses are used primarily for processing signals that will be sent to monitor outs or other paths. You may choose to process an
AUX/EFX aux buss and then send it to one or more AUX/MON busses. This way you can efficiently perform effects processing that can
be used over several monitor outs.
If needed, some EFX busses can be used as monitor outputs (within limitations of available sources). In addition, monitor busses can be
used for more effects processing and routed to the main mix rather than a monitor (IO device).
All AUX/MON and AUX/EFX busses can be stereo or mono.