Waves eMotion LV1 64-Channel Mixer with Axis One Custom Computer - Manual (Page 161)

156
Waves eMotion LV1 User Guide | Chapte r 4: Mixer Window
Window
Master Fader
1 Master Fader Selection: Determines which output is controlled by the master
fader (L/R, Center, or Mono). In the “Sends on Faders” mode, the master fader
controls the selected aux channel output level. The name of the aux channel that is
being controlled is shown in the L/R value box.
2 Master Fader Mute: Mutes the master channel that the fader is controlling.
3 Master Fader: The Maser Fader controls the master buss and can be assigned to the L/R
main mix, Center, and Mono. When the mixer is in the “Sends on Faders” mode, the
fader maps the AUX/EFX or AUX/MON output and the buss name appears above the
fader. The Master Fader is visible from all windows, and its position is not affected by
layer or layer mode selection.
Fader position is shown above the peak indicator. Range: -144 dB to +10 dB
4 Peak Level: Indicates peak level of the master output. When peak level exceeds the
clip threshold setting, the value box is red. Meter behavior is set in the User Interface
page (Settings > U/I Settings).
Click the value box or anywhere on the meter to reset the indicator.
5 Master Output Meter: Peak meter in dBFS. Range: -144 to 0 dBFS.
6 Cue/Solo: Activates send to Cue or Solo busses for channel monitoring. Clear all
instances with the Clear Solo button on the Top Bar.
1
2