Waves eMotion LV1 64-Channel Mixer with Axis One Custom Computer - Manual (Page 106)

101
Waves eMotion LV1 User Guide | Chapte r 3 : Channel Window
Window
AUX/EFX and AUX/MON Sends Section
The Aux Sends section is used to send a channel’s signal to an auxiliary buss while providing a dedicated set of gain and pan controls for
that specific route. This is independent of the channel’s main output and pan. These auxiliary busses converge in Aux channels, which
can serve many functions, such as effects or monitor mixes.
•When using an aux for effects processing, the effect plugin is placed in the Aux channel, which is then routed back to main out or sent
to other destinations.
•When using an aux for monitoring, the Aux channel is assigned directly to an I/O that feeds the monitor.
In both cases, each source channel sent to an aux buss can have its own gain and pan settings. Aux channels are controlled in the AUX
layer of the Mixer window.
1 Aux channels select
2 Send on/off
3 Send source select
4 Aux channel name and multipurpose
value display
5 Pan/balance/rotate control
6 Channel send fader
A
UX
S
ENDS
S
IGNAL
F
LOW
Whether or not a channel or a buss can be sent to an aux channel depends on its position in the signal flow. All Input channels and
groups can be sent to aux channels, since they are at the beginning of the chain. The EFX aux channels can be sent to the MON aux
channels, which they precede in the signal flow. MON aux channels cannot be sent to the EFX busses.
2
1
3 4 5
6