Waves eMotion LV1 64-Channel Mixer with Axis One Custom Computer - Manual (Page 107)

102
Waves eMotion LV1 User Guide | Chapte r 3 : Channel Window
Window
Au x Sends
1. Aux channels sends select
Choose between two sets of 8 aux sends:
1–8 Aux tracks used primarily for effects processing
9–16 Aux tracks used primarily for monitor mixes and sends
Aux channels are controlled in the Aux 1–16 layer of the Mixer window.
2. Se nd on/off
3. Se nd source select
INP After input gain, before all processing
PRE Pre-fader, after processing
PST Post-fader, after processing
PSP Post-fader, after processing, post-panner
4. Aux channel name a nd value display
Normally displays name of the aux channel. When an aux send fader is touched, its value is displayed in the box until
the control is released. Similarly, the aux send pan/balance/rotate value is displayed when its control is touched. Aux
channels are named in the Mixer window (Mixer window > Aux layer) or in the Patch window.
5. Pan/balance/rotate/widt h control
Controls panning of mono sources, as well as balance, stereo rotation, and image width of the send. A stereo mixer
channel has stereo balance, rotation, and width controls. A mono channel has only a panner.
Range depends on function. See the next section for details about this multifunction control.
6. Channel se nd fader
Sets gain of send to aux.
Range: -144 dB to +10 dB