Waves eMotion LV1 64-Channel Mixer with Axis One Custom Computer - Manual (Page 148)

143
Waves eMotion LV1 User Guide | Chapte r 4: Mixer Window
Window
Stereo/Mono Mix Channels
Many channels can be either stereo or mono.
Toggle a mixer channel between mono
and stereo by clicking the input selector
at the top of its channel strip in the
Mixer window.
Pan/Balance/Rotate Functions
You can also do this in the Channel window. Go
to the channel’s Input section, click Add, and
choose “Flip to Stereo” or “Flip to Mono” from
the drop- down menu.
Multi-function pan/balance/rotate knobs provide mono panning and stereo balance and rotation.
Mono Panner/Stereo Balance Knob: When a mono signal is bussed to a stereo channel, rotating the
panner causes a gain decrease in one channel and a corresponding increase in the other. This is classic
panning. When the panner is used on a stereo channel, the source moves right to left.
Left a nd Right Panners: The panners set the pan values of the left and right channels to the destination
independently. Adjusting the panners together is stereo rotation—moving a stereo image within a
soundscape while retaining its image and width. Consider this to be the stereo equivalent of mono
panning.
Moving one panner widens or narrows the stereo image asymmetrically. Ctrl+drag to widen or narrow the
stereo image evenly. The image can be summed to mono (width=0) or panned beyond mono to reverse
the stereo image (rotation indicator turns brown).
Stereo Rotation/Stereo Width : The colored area between the panners indicates the width and direction
of the stereo image. Drag this area to rotate the image.
Value : Indicates the value of the selected control.
A