Waves eMotion LV1 64-Channel Mixer with Axis One Custom Computer - Manual (Page 25)

20
Waves eMotion LV1 User Guide | Chapte r 1: Setup Window
Sample Rate Controls
6. Sample Rate Master/Slave Status Selector
Controls whether the mixer is the sample rate master or a slave. As such, it determines how the sample rate of a system is established.
7. Sample Rate Selector Menu
Sets the system sample rate when the mixer is the sample rate master. The Sample Rate window displays the sample rate of the system.
The menu is disabled when the mixer is a sample rate slave, since it can set the sample rate only when in the master mode.
The sample rate of the clock master device can always be set from its control panel, whether the mixer is in Sample Rate Master or Slave
mode. Sample rate is discussed later in this chapter ( Setup > System Inventory > Sample Rate Master vs. Sample Rate Slave ).
D
EVIC E
R
ACKS
8. I/O Rack A
Assign up to eight I/O devices. These can be hardware devices, software I/Os (drivers), or a combination of these.
9. I/O Rack B
Assign up to eight I/O devices. Racks A and B are identical.
10. Server s Rack
Assign up to eight I/O devices per rack. These can be hardware devices, software I/Os (drivers), or a combination of these.
The two racks are identical.
11. Control Protocols Rack
Assign control surface devices.
12. Populate d Device Slot
When a device has been assigned to a slot, its icon appears here. The icon contains information about the device.
13. Empty Device Slot
A slot with no assignment is labeled “Add Device.”