Waves eMotion LV1 64-Channel Mixer with Axis One Custom Computer - Manual (Page 57)

52
Waves eMotion LV1 User Guide | Chapte r 1: Setup Window
Input Meter
Selects the metering point at which input level will be measured. Options:
pre-digital or post-digital trim
Output Meter
Separately selects output metering points for channels, groups, aux, and masters.
Options: Pre-fader or post-fader for each category
Delay Units
Sets the unit of measure for delay-related displays. This choice is provided for convenience only and does
not affect delay processing.
Delay Units: milliseconds, feet, meters, samples
Spee d of Sound
User-determined speed of sound measurement for use in delay-related calculations. Display is in meters .
Default: 340 meters/second
Peak a nd Cli p Settings
Clip Threshold determines the level at which a peak light turns red, indicating clipping. Setting the Clip
Threshold setting below 0 dBFS provides a warning before clipping occurs. This setting does not affect the
behavior of the peak level indicator.
Clip Threshold: 0 to -28 dBFS, Clip Hold: 0–5 seconds, Peak Hold: 0–5 seconds
Mixer Window
Determines the meter source of the channel strip meters in the Mixer window. Options:
Input or output
Channel Select Follow Fader
When selected, activating a fader in the Mixer window selects the channel. When deselected, touching and moving a fader will not select
its channel. In this mode you can adjust a fader of a channel in the Mixer window while adjusting the parameters of another in the
Channel window. Touch the top or bottom sections of a channel strip to select the channel or use the channel selector in the Top Bar.