Waves eMotion LV1 64-Channel Mixer with Axis One Custom Computer - Manual (Page 210)

205 Waves eMotion LV1 User Guide | Appendix D: Mackie Control
Faders: Follow Aux-Sends Flip
In the “Sends on Faders” mixer mode, the channel faders control the level of the aux send, not the channel itself. Select “Follow Aux-
Sends Flip” to enable controller faders to follow this behavior. Refer to Mixer > Aux Modes > Sends on Faders for more about using large
faders to control aux sends.
Master 1
Use this drop-down window to assign which channel the master fader is controlling. This can be the Main L/R mix or any other channel or
buss in the mixer.
Master 1: Follow Aux-Master Flip
When in the “Sends on Faders” mode, the master fader controls the aux channel. This setting determines if the control surface master
fader exhibits this behavior.
Global Controls
Mute Groups to Function Select 1–8
Assigns the mute group recall buttons (left side of the Mixer window) to the eight function buttons on the controller (these controls are
not available in some controllers).
U
SER
A
SSIGNABLE
K
EYS TO
G
LOBA L
V
IEW
C
ONTROLS
The mixer has eight user-assignable keys that are recalled in the User section of the Mixer windows. This selection assigns these keys to
the controller’s Global View section. Refer to Setup > U/I Settings for information about creating user-assignable keys. (These controls are
not available in some controllers).
J
OG
W
HEEL
S
ELECTED
C
ONTROLS
Assigns any continuous control to the controller’s Jog Wheel. Selected mixer buttons are assigned to the Scrub button next to the Jog
Wheel.
A Mackie Control tablet application can be configured to work with eMotion LV1 over WiFi or USB. Refer to the application’s user guide
to create a MIDI device that will be available in the MIDI device menu. Select this device as you would with any hardware controller.