Waves eMotion LV1 64-Channel Mixer with Axis One Custom Computer - Manual (Page 112)

107
Waves eMotion LV1 User Guide | Chapte r 3 : Channel Window
Window
7. Value box
Indicates the value of the selected control.
Panner/Balance/Rotator control: Mono panner position, stereo panners, stereo width, stereo rotation value.
Fader: Position is shown then when the fader is touched.
8. Peak level indicator
Displays channel peak level and clipping. Clip threshold, clip hold, and peak hold are set in the U/I Settings page (Setup > U/I
Settings > Peak and Clip).
9. Link/DCA assignments
A channel can be assigned to up to 16 Link groups, each of which provides linked control over multiple channels. A Link Group
couples a channel’s panner/balance/rotation, mute, cue/solo, trim, polarity, and preamp controls with equivalent controls in
other channels. A Link/DCA fader remotely controls the trim value of a group of assigned faders. (See Mixer > Link/DCA Layer)
10. Channel fader
Sets channel gain main mix output—one fader for mono or stereo channel. Faders under the control of a DCA do not move. They
stay at their original position, while a “ghost fader” shows the current channel level as determined by the Link group DCA fader.
Post-fader and post-pan signal sources are both affected by this fader.
Range: -144 dB to +10 dB
11. Meter
Stereo or mono peak meter.
Range: -INF to +10 dBFS
Infinite-hold peak indicator. Click anywhere on the meter to clear. Pre- and post-fader meter status is set at Setup > U/I Settings.
12. Mute gro up assignment
Assigns the channel to up to eight mute groups. Mute groups are recalled in the Mix window or from a control surface.
13. Show keyboard
Accesses the operating system’s touch-screen keyboard. Use this to enter text information on a touchscreen display when a
hardware keyboard is not available. Alt and Ctrl modifier keys provide additional keyboard functionality. These keys are latching;
click again to release.