Biamp LTR - Manual (Page 87)

Software Tools
Clicking on CobraNet Info provides a spreadsheet
of CobraNet® channels used in the system. The
upper row and left column are the Audia unit IDs
taken from the
Equipment Table . 'Extern' denotes
external CobraNet I/O devices of all types.
CobraNet Info is enabled via Compile Options .
Signal Path Identifier
Provides a temporary color-coded identification of all audio signal paths (Lines) which are
associated with a selected Line Object. See example below, where the selected input is shown
as being routed to four outputs. Signal Path Identifier is represented by a thin dashed red line.
However, the Signal Path Identifier color may be changed in
Display Options . When using
Signal Path Identifier on a compiled design, propagation delay will appear in the Status Bar .
Persistent Signal Path Identifier is available in Normal Mode (follows subsequent line
selections), Locked Mode (remains on original line selection), or Off (temporary selection). If the
selected Line Object includes identifying text (see
Line Property Sheet ), that text will be
temporarily imposed on all lines being indicated by Signal Path Identifier.
Options
Allows global options to be selected, which affect software behavior. An Options dialog box
appears, with four tabs: General; Display; Compile; and Network.
see General Options
see Display Options
see Compile Options
see Network Options
67