Biamp LTR - Manual (Page 180)

Audia-Manual-LTR
Unit #__ has no CobraNet communication module.
Too many CobraNet inputs or outputs allocated to unit #__.
Explanation: The number of audio channels assigned as fixed allocations in a
specific Audia unit exceeds the capacity of that unit.
Message: A suitable I/O card cannot be found in unit #__ for one or more I/O blocks
with fixed allocations.
Explanation: The specified FLEX unit does not include the appropriate I/O card type(s)
to match blocks which are assigned to that unit through fixed allocations .
Message: The '__' block (object code '__') at [__,__] cannot be placed into the
Audia unit to which it is allocated.
Explanation: The Audia unit does not support the I/O type which is represented by the
specified block.
Messages: Insufficient DSP power for fixed allocations in unit #__: ___% of
capacity requested.
Explanation: The DSP resources assigned as fixed allocations in a specific
Audia unit exceed the capacity of that unit.
Message: Gang #__ requires too many resources.
Explanation: The component objects allocated to the specified gang require more
resources (audio channels and/or DSP power) than is available
from any current Audia unit .
Message: Too many CobraNet inputs or outputs allocated to gang #__.
Explanation: No more than 16 CobraNet Input and 16 CobraNet Output blocks
can be placed into an Audia unit. Therefore, this allocation is
not feasible.
Message: Invalid reference signal, AEC Reference block (object code '__') at [__,__].
160