Biamp LTR - Manual (Page 228)

Audia-Manual-LTR
Delay in Meters DLYM SET, SETL, GET, GETL None 0 ~ block maximum *
Delay in Inches DLYIN SET, SETL, GET, GETL None 0 ~ block maximum *
Delay in Feet DLYFT SET, SETL, GET, GETL None 0 ~ block maximum *
Delay Bypass DLYBYP SET, GET None 0 ~ block maximum *
* Can contain a decimal number.
Note : Value Range is from 0 to the maximum value for the specific delay block. For example, a
50mSec delay has a maximum setting of 1717 centimeters, 17 meters, 676 inches, or 56 feet.
Example: Set Device 1 Delay In Centimeters at Instance 24 to 40 centimeters.
Command Dev # Attribute Inst ID Index 1 Index 2 Value Line Feed
SET 1 DLYCM 24 None None 40
Result: SET 1 DLYCM 24 40
Control Blocks
Level Faders Attribute Commands Index Value Range
Fader Level FDRLVL SET, SETL, GET, GETL, INC,
DEC 1 -100 ~ 12 *
Fader Mute FDRMUTE SET, GET 1 0 = unmuted
1 = muted
* Can contain a decimal number.
Mute Button Attribute Commands Index Value Range
Mute MBMUTE SET, GET 1 0 = unmuted
1 = muted
Logic State Attribute Commands Index Value Range
Logic State LGSTATE SET, GET 1 0 = off
1 = on
208