Biamp LTR - Manual (Page 21)

Introduction
AudiaFUSION
.AudiaFUSION Networked Amplified Processor is an 8-channel modular amplifier with CobraNet
digital I/O, digital signal processing, and automatic channel or device failover. The device
provides amplified outputs to directly drive 4, 6, or 8 Ohm low-impedance loudspeaker systems or
70 or 100V constant voltage loudspeaker systems. When placed into the layout from the Object
toolbar, AudiaFUSION output blocks are software configurable for 100–600 watts per channel.
The combined wattage of all power amplifier modules in an AudiaFUSION chassis can be up to
2400 watts.
Initialization Properties
An AudiaFUSION unit appears in Audia software as an output block. When an AudiaFUSION
device is chosen from the I/O menu in the Object toolbar and the mouse is clicked in the layout
window, an AudiaFUSION Amp Initialization Dialog window appears.
Channel Power is used to select the power rating (in watts) for all channels controlled by that
block.
Channel Count is used to select the number of amplifier channels that block will provide. The
maximum number of channels available with this parameter is affected by the Channel power
setting. For example, a setting of 600 watts would result in a maximum Channel count of 4, as
600 watts x 4 channels = 2400 watts, which is the maximum amplifier capacity of one
AudiaFUSION frame.
Enable Logic Outputs is used to determine if the AudiaFUSION block will provide logic output
connection points.
1