Biamp LTR - Manual (Page 107)

Component Objects
EXPO
EXPO blocks are similar to CobraNet Output blocks, except they are
designed for use with AudiaEXPO hardware specifically and,
therefore, automatically allow for Internal Propagation Delay.
CobraNet® Output blocks may be used with AudiaEXPO hardware,
but Internal Propagation Delay must be manually set (0.33mS).
Mute Out turns the output signal on/off. Level Out adjusts the relative
output volume. Invert Out reverses the polarity of the output signal.
CobraNet Bundle assigns digital audio data to a particular bundle. CobraNet Bundle
Numbers are used to match those of the actual AudiaEXPO hardware being used in the
system. Normally, 'unicast' bundles 256 ~ 65,279 are selectable. These are device
specific bundles (for exchange of digital audio with only one other device). Multicast
allows selection of bundles 1 ~ 255, which are not device specific (for exchange of
digital audio with multiple devices). Enable turns on/off the exchange of CobraNet
digital audio data from this device.
Right-clicking over certain settings will provide a menu of additional
options.
87