Select 8, Specialty, See sele – Biamp LTR User Manual
Page 156
Audia-Manual-LTR
Volume 8 controls fit most US standard single-gang back-boxes (back-boxes are available
separately from Biamp Systems). Custom
may be printed for the Volume 8.
Please refer to the 'Installation Guide' (included with controls), or see
for
more information. External controls must be identified (see
) and associated
with their corresponding component blocks within the layout (see
).
Select 8
The Select 8 is an external control device, which allows
initiation of eight selectable Audia actions. Actions can be
individual or grouped functions within Audia. This
includes recalling presets, ducking, combining, etc.
Select 8 components have no Control Dialog Boxes.
They are represented in the layout as a block with eight
control output nodes. These control output nodes are
connected to control input nodes on the other component
blocks to be controlled. These other components may
include
,
,
combining routines can also be achieved using presets.
Logic Boxes can provide logic outputs for controlling
additional equipment, external to Audia.
Select 8 behavior can be altered using
.
Select 8 controls fit most US standard single-gang back-
boxes (back-boxes are available separately from Biamp
Systems). Custom
may be printed for the
Select 8.
Please refer to the 'Installation Guide' (included with controls), or see
for
more information. External controls must be identified (see
) and associated
with their corresponding component blocks within the layout (see
).
136