Biamp LTR - Manual (Page 226)

Audia-Manual-LTR
Noise Gate Attribute Commands Index Value Range
Bypass NGBYP SET, GET None 0 = active
1 = bypassed
Output Gain ANCGAIN GET None None
Example: Set Device 3 Noise Gate Bypass at Instance 55 to active.
Command Dev # Attribute Inst ID Index 1 Index 2 Value Line Feed
SET 3 NGBYP 55 None None 0
Result: SET 3 NGBYP 55 0
ANC Attribute Commands Index Value Range
Output Gain ANCGAIN GET None None
Router Blocks
Router Attribute Commands Index Value Range
Crosspoint RTRMUTEXP SET, GET, SETD, GETD 1 & 2 1 = unmuted
0 = muted
Note: For attributes with 2 Index fields, Index1 is the input/row, and Index2 is the output/column.
Example: Set Device 1 Router Crosspoint at Instance 98 Row 4 Column 5 to muted.
Command Dev # Attribute Inst ID Index 1 Index 2 Value Line Feed
SET 1 RTRMUTEXP 98 4 5 0
206