Biamp LTR - Manual (Page 231)

System Control
The property sheet can only be accessed in an off-line screen.
**Note** Audia software will assign an Instance ID number to each DSP block on the initial
Compile of the system. Subsequent compiles will not change the Instance ID numbers unless the
"Reassign Instance IDs" check box is selected in the " Compile " tab of the " Options " screen
(located on the Tools menu) in Audia software.
If one or more DSP block is disconnected from the audio path (when connections are not made to
at least one input or output) the Instance ID numbers will be unassigned. Instance ID numbers
will be reassigned once the DSP block(s) are properly connected again. The use of Instance ID
Tags (in lieu of Instance ID numbers) may help prevent command string conflicts caused by
reassignment of Instance ID numbers.
Index
Index refers to inputs, outputs, or cross points of an Attribute . Some Attributes will need an
Index1 (Input or Row) and/or an Index2 (Output or Column). The tables in the Attribute section
will define which, if any, indexes are required for the string.
Example: INC 1 AMLVLIN 4 1 1
In an Auto Mixer on Device 1 we are increasing the level of input 1 on instance ID 4 by 1dB.
Index1 is used to represent the input number.
Example: DEC 2 AMLVLOUT 6 1 2
211