Input/output expanders, Equalizer blocks, Expanders – Biamp LTR User Manual
Page 194: Hardware, Specifi, Specifically
Audia-Manual-LTR
CAN bus error
No IP address defined (cleared by setting an IP address)
Status LED: red
Configuration error
Last configuration unsuccessful (cleared by 'reset/initializing' the device)
Operating system resource error
File system error
DSP error
All LEDs blinking
Operating system is not executing. Device must be power-cycled.
Status LED blinking
The firmware has attempted to perform an illegal operation. Device must be power-cycled.
Input/Output Expanders
AudiaEXPI
accepts eight mic/line analog audio inputs and provides eight channels of digital
audio output via CobraNet®. AudiaEXPO accepts eight channels of digital audio input via
CobraNet and provides eight line-level analog audio outputs. AudiaEXPI and AudiaEXPO can
simply add inputs/outputs to a centralized system, or they can extend system boundaries by
providing inputs/outputs in remote locations. These hardware devices are represented as blocks
in AUDIA software, for easy inclusion into any system design. AudiaEXPI and AudiaEXPO may
also be used with other CobraNet compliant products.
AudiaEXPI
AudiaEXPO
174