Control dialogs, Way crossover, Ducker – Biamp LTR User Manual
Page 136
Audia-Manual-LTR
Once a Component Object is placed into the Layout, all available settings can be accessed by
double-clicking over the object. This produces a Control Dialog Box, which displays the
component controls in a more conventional user interface.
see 2-Way Crossover Control Dialog
see 3-Way Crossover Control Dialog
see 4-Way Crossover Control Dialog
Right-clicking over the object provides a pop-up menu of options.
Control Dialogs
2-Way Crossover
Input Level
provides muting and level adjustment for the input. Output Range selects the Low
or High frequency output. Frequency selects the filter cutoff frequency for the selected output.
Output Range & Frequency may also be selected by dragging the cursors shown inside the
graph. Filter / Slope selects the type (Linkwitz-Riley or Butterworth) and slope of filter used at
the associated Frequency. Output Level provides muting, level adjustment, & polarity reversal
for the selected output. Sync forces filter adjustments on adjacent outputs to be linked. Settings
for each output are displayed across the bottom of the dialog box.
Right-clicking over certain settings will provide a menu of additional options.
116