Hardware, Rear panel connections, Attribute – Biamp LTR User Manual
Page 191: Input/output blocks, T of, Chassis, Cards, Is being, A tele, Via the
Hardware
Rear Panel Connections
Audia
® hardware is represented by three different chassis models: standard Audia;
AudiaSOLO
; and AudiaFLEX. Standard Audia is a 2RU CobraNet® only chassis and
AudiaSOLO
is a 1RU non-CobraNet only chassis. These two chassis are available in three I/O
configurations: 8-in & 8-out (8x8); 12-in & 4-out (12x4); 4-in & 12-out (4x12). AudiaFLEX is the
newest chassis design, which allows up to 24 inputs/outputs, in any combination of channel
pairs (see Input/Output below for physical location). AudiaFLEX is available with or without
CobraNet. Inputs & outputs are analog, with internal 24-bit A/D & D/A converters, operating at a
sample rate of 48kHz. All internal processing is digital (DSP). CobraNet 8-channel
are also available.
171