Copy a photo onto a full-size page – HP 7200 User Manual
Page 62
Tip
If the output is not borderless, then set the paper size to the
appropriate Borderless menu selection, set the paper type to
Photo
Paper
, set the
Photo
enhancement, and then try again.
For more information on setting the paper size, see
For information on setting the paper type, see
For information on setting the
Photo
enhancement, see
Copy a photo onto a full-size page
You can use the
Fill Entire Page
setting to enlarge or reduce your original to fill the
printable area of the paper size loaded in the input tray. In this example,
Fill Entire
Page
is used to enlarge a 10 x 15 cm (4 x 6 inch) photo to create a full-size
borderless copy. When copying a photo, you might want to use the photo print
cartridge for superior print quality. With the tri-color and photo print cartridges
installed, you have a six-ink system. See
for more
information.
Note
In order to achieve a borderless print without changing the proportions
of the original, the HP All-in-One might crop some of the image around the
margins. In most cases, this cropping will not be noticeable.
Note
In order to make a borderless copy, you must have photo paper (or
other specialty paper) loaded. If the HP All-in-One detects plain paper in the
input tray, it will not make a borderless copy. Instead, your copy will have
borders.
Note
This feature will not work correctly if the glass and lid backing are not
clean. For more information, see
.
1.
Load letter or A4 photo paper in the input tray.
If your HP All-in-One has more than one input tray, you might need to select the
correct input tray. See
Select an input tray for copying
for more information.
2.
Load your original photo face down on the right front corner of the glass.
Position the photo on the glass so the long edge of the photo is along the front
edge of the glass.
3.
In the Copy area, press
Reduce/Enlarge
until
Fill Entire Page
appears.
4.
Press
Start Copy Color
.
User Guide
59
Use
the
copy
features