HP 7200 - Manual (Page 115)

Note 2 If your HP All-in-One loses power for more than 72 hours, you will
need to reset the date and time.
1. Press Setup .
2. Press 4 , and then press 1 .
This selects Basic Fax Setup and then selects Date and Time .
3. Enter the month, day, and year by pressing the appropriate numbers on the
keypad. Depending on your country/region setting, you might enter the date in a
different order.
The underline cursor is presented initially beneath the first digit; it automatically
advances to the next digit when you press a button. The time prompt
automatically appears after you enter the last digit of the date.
4. Enter the hours and minutes.
If your time is displayed in the 12-hour format, the
AM or PM prompt
automatically appears after you enter the last digit.
5. If prompted, press 1 for AM, or 2 for PM.
The new date and time settings appear on the control panel display.
Set the fax header
The fax header prints your name and fax number on the top of every fax you send.
We recommend that you set up the fax header by using the Fax Setup Wizard
(Windows users) or the Setup Assistant (Macintosh users) during the HP Image
Zone software installation.
You can also set up or change the fax header from the control panel.
Note In some countries/regions the fax header information is a legal
requirement.
1. Press Setup .
2. Press 4 , and then press 2 .
This selects Basic Fax Setup and then selects Fax Header .
3. Enter your personal or company name by using the numeric keypad, and then
press
OK .
For information on entering text from the control panel, see Enter text and
symbols . You can enter up to 25 characters.
4. Enter your fax number by using the numeric keypad. You can enter up to 19 digits.
5. Press OK .
You might find it easier to enter fax header information by using the HP Image Zone
software. In addition to entering fax header information, you can also enter cover
page information that will be used when you send a fax from your computer and
attach a cover page. For more information, see the onscreen HP Image Zone Help
that came with your HP Image Zone software.
Enter text and symbols
You can enter text and symbols from the control panel by using the keypad on the
control panel when you set up speed-dial entries and the fax header information.
You can also enter symbols from the keypad when you dial a fax or phone number.
When the HP All-in-One dials the number, it will interpret the symbol and respond
Chapter 11
112 HP Officejet 7200 All-in-One series
Use the
fax
features