Ethernet connection to a wireless network, Connect to an ethernet network, What you need connect your hp all-in-one – HP 7200 User Manual
Page 138: Connect, To an ethernet network
Ethernet connection to a wireless network
Your access point connects a wired device to a wireless network. In this model, your
computer is configured for wireless networking using a wireless network adapter, and
transfers and receives data through the access point. Your HP All-in-One is
configured for wired networking and is connected with an Ethernet cable to the access
point. A DSL or cable modem can provide Internet access. For connection
instructions, see
Connect to an Ethernet network
.
Note
In this configuration, we recommend that you route the Internet
connection directly through the access point using an Ethernet cable.
Connect to an Ethernet network
Use this chapter to connect your HP All-in-One to a router, switch, or access point
using an Ethernet cable.
For ideas on how to set up a wired network, see
Note
For definitions of terms not defined here, see the
.
To connect your HP All-in-One to your computer, first see the next section for the
things you will need. When you are finished connecting your HP All-in-One, you will
need to install the software as described in
Install the software for a network connection
User Guide
135
Set
up
your netw
ork