HP 7200 - Manual (Page 56)

7 Use the copy features
The HP All-in-One allows you to produce high-quality color and black-and-white
copies on a variety of paper types, including transparencies. You can enlarge or
reduce the size of an original to fit a specific paper size, adjust the darkness and color
intensity of the copy, and use special features to make high-quality copies of photos,
including 10 x 15 cm (4 x 6 inch) borderless copies.
This chapter provides instructions for increasing copy speed, enhancing copy quality,
setting the number of copies to print, guidelines for choosing the best paper type and
size for your job, making posters, and making iron-on transfers.
Tip For the best copy performance on standard copy projects, set the paper
size to Letter or A4 , the paper type to Plain Paper , and the copy quality to Fast .
For more information on how to set the paper size, see Set the copy paper size .
For information on how to set the paper type, see Set the copy paper type .
For information on setting the copy quality, see Increase copy speed or quality .
You can learn how to perform photo copy projects, such as making borderless copies
of photos, enlarging and reducing the copies of photos to suit your preference, making
multiple copies of photos on a page, and making quality enhancements to copies of
faded photos.
Make a borderless copy of a photo .
Copy a photo onto a full-size page .
Copy a photo several times on one page .
Enhance light areas of your copy .
Set the copy paper size
You can set the paper size on your HP All-in-One. The paper size you select should
match what is loaded in your input tray. The default paper size setting for copying is
Automatic , which causes the HP All-in-One to detect the size of paper in the input tray.
To set the paper size from the control panel
1.
Make sure you have paper loaded in the input tray.
2. Load your original face down on the right front corner of the glass or face up in
the document feeder tray.
If you use the document feeder tray, place the page so that the top of the
document is inserted first.
3. In the Copy area, press Menu until Copy Paper Size appears.
4. Press to select the appropriate paper size, and then press OK .
5. Press Start Copy Black or Start Copy Color .
User Guide 53
Use
the
copy
features