HP 7200 - Manual (Page 26)

3 Connection information
Your HP All-in-One comes equipped with an RJ-45 Ethernet port for wired networking
capability. It also comes equipped with a USB port so you can connect directly to a
computer using a USB cable.
Supported connection types
Description Recommended
number of
connected
computers for best
performance Supported software
features Setup instructions
Ethernet (wired)
connection Up to five computers
connected to an
HP All-in-One using a
hub or router. All features are
supported, including
Webscan.
For more information
on Webscan, see
Use Webscan .
Follow the Setup
Guide for detailed
instructions.
USB connection One computer
connected to an
HP All-in-One using a
USB cable.
The USB port is
located on the rear of
the HP All-in-One. All features are
supported, except
Webscan. Follow the Setup
Guide for detailed
instructions.
Windows printer
sharing Up to five computers.
The host computer
must be turned on at
all times, or the other
computers will not be
able to print to the
HP All-in-One. All features resident
on the host computer
are supported. Only
print is supported
from the other
computers. For setup
instructions, see
Use
Windows printer
sharing
.
Printer sharing
(Macintosh) Up to five computers.
The host computer
must be turned on at
all times, or the other
computers will not be
able to print to the
HP All-in-One. All features resident
on the host computer
are supported. Only
print is supported
from the other
computers. For setup
instructions, see
Use
printer sharing
(Macintosh OS X)
.
User Guide 23
Connection information