Epson 3865X Plus - Manual (Page 92)

Follow these steps to run HDSIT:
1. Exit any program you are using and make sure the MS-DOS
command prompt appears on the screen.
2. Insert the Reference diskette in drive A.
3. Type the following and press Enter:
A:HDSIT
You see a message on the screen that tells you the disk drive’s
read/write heads will remain locked until you reset the
computer or turn the power off and on again. The computer
locks the heads and disables the keyboard. Remove the
Reference diskette and turn off the computer. You are now
ready to move it to the new location.
If your computer came with a 5 diskette drive, and
you still have the original diskette drive protector card, you
may want to insert it into the drive prior to shipping your
computer. This is simply an added precaution you can take to
protect the read/write heads.
Using Your Computer 3-25