Epson 3865X Plus - Manual (Page 47)

Note
You may not want to use the
copy-protected programs. See
in Chapter 4 for more information.
This section describes how to set the processor speed in the
Setup program. You can also change the speed using keyboard
commands or by running the ESPEED program. See “Changing
the Processor Speed” in Chapter 4 for more details.
Follow these steps to set your processor speed:
1.
2.
3.
4.
5.
At the main Setup menu, highlight Processor
speed. The current status appears:
Speed: High
If the displayed setting is correct, skip this section.
To change the processor speed, press Enter. The cursor
moves into the submenu and you see:
High
A u t o m a t i c
Low
(High is 16 MHz-, 16 MHz; simulates 8 MHz; and automatic tells
the computer to switch from high to low when accessing a
diskette drive.)
Press Enter to move the cursor block into the option menu.
Use or to highlight the speed you want and press Enter.
Highlight * * SAVE SETTING ** and press Enter to
return to the main Setup menu.
2-12 Running the Setup Program