Epson 3865X Plus - Manual (Page 163)

Note
This description assumes that you are using a Computer
with only one diskette drive. If you have two diskette
drives the computer copies from drive A to B without
prompting you to remove either diskette.
5. Remove the Utility 1 diskette, insert the blank formatted
diskette, and press any key. The screen displays the message
below:
Insert diskette for drive A: and
press any key when ready
6. Remove the formatted diskette and insert the Utility 1
diskette again. When you see the MS-DOS prompt, type
the following and press Enter:
COPY \GEM2\GEMSETUP.TXT B:
The screen displays the message below:
Insert diskette for drive B: and
press any key when ready
7. Remove the Utility 1 diskette, insert the formatted diskette,
and press any key. The screen displays this message:
Insert diskette for drive A: and
press any key when ready
8. Remove the formatted diskette and insert the Utility 1
diskette again. When you see the MS-DOS prompt, type
the following and press Enter:
COPY \GEM2\*.SYS B:
A-18 Using the VGA Utilities