Epson 3865X Plus - Manual (Page 104)

Follow these steps to enter your password:
1. Type your password and press Enter. You do not see
anything you type and the display does not change.
2. Press Enter again. The MS-DOS prompt appears again
beneath the first prompt, as shown below.
C : \ >
C : \ >
Now you can access the system.
If the display does not change, you entered an incorrect
password. Type the correct password and press Enter twice
to access the system.
Note
If you forget the power-on password, see "Password
Problems”
in Appendix D.
4-12 Enhancing System Operations