Epson 3865X Plus - Manual (Page 19)

Before you set up your computer, it’s important to choose a
convenient location where it can run properly. Select a location
that provides the following:
A large, sturdy desk or table. The surface should be strong
enough to easily support the weight of your system and large
enough to accommodate all of its components. Select a
location that allows plenty of space so you can work
comfortably.
A flat, hard surface. Soft surfaces like beds and carpeted
floors attract static electricity, which can erase data on your
disks and damage the computer’s circuitry. Soft surfaces also
prevent proper ventilation.
Good air circulation. Air must be able to move freely under
the system and behind it. Leave several inches of space
around the computer.
Moderate environmental conditions. Protect your computer
from extremes in temperature, humidity, dust, and smoke.
Avoid direct sunlight or any other source of heat. High
humidity also hinders operation, so select a cool, dry area.
Appropriate power sources. To prevent static charges,
connect all your equipment to three-prong, 120-volt
grounded outlets. You need one outlet for the computer, one
for the monitor, and additional outlets for a printer and any
other peripherals.
No electromagnetic interference. Locate your system away
from any electrical device, such as a telephone, which
generates an electromagnetic field.
1-2 Setting Up Your System