Epson 3865X Plus - Manual (Page 179)

8. When the computer displays the Screen Sizing menu, select
B (for width), type 132, and press Enter. Press X in each
menu to exit from the installation program.
9. The installation program asks whether you want to save the
new configuration. At the prompt, press Y. The
installation program saves the new configuration in the file
you specified in step 4, and the computer displays the
MS-DOS command prompt.
Running WordStar 4.0 and 5.0
To run WordStar 4.0 or 5.0 in 132 columns, you need to specify
132-column text mode prior to starting WordStar. You do this
using the VGAMODE program. (See “VGAMODE Utility
Program,” later in this appendix, for instructions on installing
VGAMODE.) After installing VGAMODE, follow these steps:
1. Type the command below and press Enter to specify
132-column text mode:
VGAMODE 132, 25
2. Type the following and press Enter to start WordStar.
WS132
After you exit WordStar, if you want to return to 80-column
mode, type the following and press Enter:
VGAMODE 80, 25
A-34
Using the VGA Utilities