Epson 3865X Plus - Manual (Page 175)

9. Choose one of the following drivers from the Text Display
menu:
VGA 82C451 (80 x 50)
VGA 82C451 (132 x 25)
VGA 82C451 (132 x 50).
Note
Although the menu displays 82C451, it should read
82C452.
10. After selecting the appropriate driver, select Return to
menu.
1 1 . S e l e c t S a v e c h a n g e s .
12. The menu prompts you for the name of your new Lotus
configuration file. Lotus uses a default name in the prompt.
(For example, the name is 123 for Lotus 1-2-3). Change
this name to a filename that indicates the resolution of the
driver in the file.
For example, if you installed the 132 column by 25 line
driver, you could name this file 132X25. Or, if you installed
the 80 by 50 driver, you might name the file 80X50.
13. Exit the Lotus installation program by selecting Exit
from the main installation menu.
If you use a name other than 123 as the filename for
Lotus l-2-3, you must include your filename on the command
line you enter to start Lotus l-2-3. For example, if you named
your driver set 132X25, type the following command and press
Enter to start Lotus 1-2-3:
1 2 3 1 3 2 X 2 5 . S E T
A-30 Using the VGA Utilities