Epson 3865X Plus - Manual (Page 186)

Installing the Utility
The SETVGA utility is in the UTILS directory on the Utility 1
diskette. To install the utility, follow these steps:
1. If you do not already have a directory for utility programs,
create a directory on your hard disk for SETVGA. (See your
MS-DOS Reference Manual for information on creating
directories.)
2. Insert the Utility 1 diskette in drive A and copy the
program from the Utility 1 diskette to your utilities
directory.
For example, if you created a directory called SET, you
would type the following and press
Enter to copy the
program:
COPY A:\UTILS\SETVGA.EXE C:\SET\
Adding SETVGA to the AUTOEXEC.BAT file
For convenience in accessing SETVGA, include a pathname in
your AUTOEXEC.BAT file. Follow these steps:
1. At the MS-DOS command prompt in the root directory,
type the following and press Enter:
COPY AUTOEXEC.BAT+CON AUTOEXEC.BAT
2. To set the path for the SETVGA utility, type the following
and press Enter:
PATH C:\pathname\
Using the VGA Utilities
A-41