Epson 3865X Plus - Manual (Page 167)

7. Remove the Utility 1 diskette, insert the formatted diskette,
and press any key. The screen displays the message below:
Insert diskette for drive A: and
press any key when ready
8. Remove the formatted diskette and insert Utility 1 diskette
again. When you see the MS-DOS prompt, type the
following and press
Enter:
COPY \GEM3\GEMSETUP.TXT B:
The screen displays the message below:
Insert diskette for drive B: and
press any key when ready
9. Remove the Utility 1 diskette, insert the formatted diskette,
and press any key. The screen displays the message below:
Insert diskette for drive A: and
press any key when ready
10. Remove the formatted diskette and insert the Utility 1
diskette again. When you see the MS-DOS prompt, type
the following and press Enter:
COPY \GEM3\*.VGA B:
The screen displays the message below:
Insert diskette for drive B: and
press any key when ready
11. Continue inserting the Utility 1 diskette when the
computer prompts you for the diskette for drive A and
inserting the formatted diskette when the computer
prompts you to insert the diskette for drive B. When all the
.VGA files are copied, you see the MS-DOS prompt.
A-22 Using the VGA Utilities