Epson 3865X Plus - Manual (Page 189)

2. To set the path for the SNOOZE utility, type the following
and press Enter:
P
ATH C:\pathname\
For instance, if you were using the example directory
described above, you would type:
PATH C:\SET\
3. Press F6 and then Enter.
See your MS-DOS Reference Manual for further information
about pathnames.
Using the Utility
To activate the utility, type SNOOZE and press Enter. You
see information about the SNOOZE command syntax and a
status message indicating that the SNOOZE delay is set to
5 minutes.
The default period of inactivity before the screen goes blank is
5 minutes. You can specify your own time period for the
SNOOZE delay by entering a number from 1 to 60 (minutes)
on the SNOOZE command line.
For example to set a SNOOZE delay of 15 minutes, type the
following and press Enter:
SNOOZE 15
To disable SNOOZE, type SNOOZE 0 and press Enter.
A-44 Using the VGA Utilities