Epson 3865X Plus - Manual (Page 165)

Digital Research GEM, Version 3.0
Epson provides GEM drivers for these resolutions:
640 x 480 16-color graphics
800 x 600 16-color graphics.
Installing the Drivers
Follow the steps below to install the display drivers. If you have
already installed GEM 3.0 on your computer, go to step 2 to
install the GEM driver. If you have not yet installed GEM 3.0,
begin with step 1.
1. Use the instructions in the GEM documentation to install
GEM, version 3.0, and select IBM 16-color VGA
( 6 4 0 x 4 8 0 ) o r C o m p a t i b l e a s y o u r m o n i t o r .
Insert the GEM 3.0 System Master Disk in drive A and log
onto drive A. Then type the following and press Enter:
GEMPREP
Follow the instructions displayed on the screen to complete
the GEM installation.
2. Follow the steps below to create a GEM driver pack disk.
First, remove the Master disk from drive A and insert a
blank diskette.
3. Format the diskette using the MS-DOS FORMAT
command or the Epson MENU Utility. (See your MS-DOS
Reference Manual for instructions.) FORMAT prompts
you for a volume label by displaying the following:
Volume label (11 characters, Enter
for none?)
A-20
Using the VGA Utilities