Epson 3865X Plus - Manual (Page 16)

Chapter 2 describes how to run the Setup program to define
your computer’s configuration. You must do this before you use
your computer. You may need to do it again later, if you change
the configuration.
Chapter 3 provides instructions for performing important
operating procedures, including using and caring for disks and
disk drives.
Chapter 4 describes specialized features you can use to enhance
your system’s performance.
Chapter 5 describes some of the options you can use in your
Equity 386SX PLUS an contains instructions for removing the d
cover, setting jumpers, and installing options.
Appendix A provides instructions for using the VGA device
drivers and utilities. You need to install device drivers only if
you plan to use extended VGA features.
Appendix B describes how to install and remove a hard disk or
diskette drive.
Appendix C describes how to perform a hardware-level format
on a hard disk. You need to do this only if you have installed a
new hard disk that has never received this type of low-level
format, or if you are having serious problems with the disk.
Appendix D contains troubleshooting tips in case you
encounter any problems while using your computer.
Appendix E outlines the system diagnostics checks. If you are
having trouble with any part of the hardware, you may want to
run some of these diagnostics checks.
Appendix F gives the technical specifications for the computer.
At the end of the manual, you’ll find a glossary and an index.