Epson 3865X Plus - Manual (Page 177)

6. To rename the WS.COM file to WS132.COM, type the
following and press
Enter:
REN WS.COM WS132.COM
7. To rename the WSORIG.COM file to WS.COM, type the
following and press
Enter:
REN WSORIG.COM WS.COM
Running WordStar 3.3
To run WordStar 3.3 in 132 columns, you must specify
132-column text mode prior to starting WordStar. To do this,
install and use the VGAMODE program. (See “VGAMODE
Utility Program,” later in this appendix, for instructions on
installing VGAMODE.) After installing VGAMODE, follow
these steps:
1. Type the following and press Enter to specify 132-column
text mode:
VGAMODE 132, 25
2. Type the following command and press Enter to start
WordStar:
WS132
After you exit WordStar, if you want to return to 80-column
mode, type the following and press Enter:
VGAMODE 80, 25
A-32 Using the VGA Utilities