Epson 3865X Plus - Manual (Page 51)

2. Press Enter to move the cursor block into the submenu.
3. To set or change the time, press Enter again. You see this
prompt:
(“hh” stands for hours, “mm” stands for minutes, and “ss”
stands for seconds.)
4. Using a 24-hour time period, enter the time in the exact
format shown in the box. Type two digits for each part; the
Setup program automatically inserts the colons ( : ). For
example, to set the time to 1:30 p.m., you would type the
following:
1 3 3 0 0 0
You can use the backspace key to make corrections.
Note
If you want to use the number keys on the numeric
keypad to enter the time or date, press Num Lock to
enable Num Lock mode. The Num Lock light is on
when Num Lock is enabled.
If you enter an invalid time-for example, a number greater
than 23 for the hours or greater than 59 for the minutes or
seconds-the computer beeps and ignores your entry. Try
again.
When the time is correct, press Enter.
2-16 Running the Setup Program