Epson 3865X Plus - Manual (Page 164)

The screen displays the message below:
Insert diskette for drive B: and
press any key when ready
9. Remove the Utility 1 diskette, insert the formatted diskette,
and press any key. The screen displays the message below:
Insert diskette for drive A: and
press any key when ready
10. Continue inserting the Utility 1 diskette when the
computer prompts you for the diskette for drive A and
inserting the formatted diskette when the computer
prompts you to insert the diskette for drive B. When all the
.SYS files are copied, the system displays the MS-DOS
prompt.
11. Now reinstall GEM 2.2. Insert the GEM 2.2 System Master
Disk in drive A, type the following, and press Enter:
SCRNSTAL C:
12. Follow the instructions in your GEM documentation and
on the screen to finish the installation. You may need to
insert the original GEM device driver disk as well as the
GEM_DRIVRPK diskette you created.
Note
If you have installed GEM 2.2 and you want to change to the
other display driver, have the GEM_DRIVRPK diskette
ready, and then start from Step 11 to change the driver.
Using the VGA Utilities A-19